Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RAID-related error v0.3.1
06-09-2009, 07:42 PM,
#1
RAID-related error v0.3.1
Hi all,

Running Supermicro X7DWA-N with LSI MegaRAID SCSI 320-2E. During StressLinux it errors, it seems it is right after identifying the RAID card. Examples of last few lines...

megaraid: probe new device 0x1000...
megaraid: fw version:[514S] bios version:[H431]
scsi5 : LSI Logic MegaRAID driver
scsi[5]: scanning scsi channel 0 [Phy 0] for non-raid devices
megaraid: aborting-1 cmd=12 <c=0 t=0 l=0>
megaraid abort: 1:0[0:0], fw owner
megaraid: 1 outstanding commands, Max wait 180 sec
megaraid mbox: wait for 0 commands to complete
megaraid mbox: reset sequence completed successfully
megaraid: aborting-1 cmd=12 <c=0 t=0 l=0>
....repeating until...
megaraid abort: 1:0[0:0], fw owner
5:1:0:0: scsi: Device offlined - not ready after recovery

repeating with different addresses

Any ideas on root cause? I've tried different cards with same result, as well as different FW version.
Reply


Messages In This Thread
RAID-related error v0.3.1 - by JAL - 06-09-2009, 07:42 PM
RE: RAID-related error v0.3.1 - by stresslinux - 08-04-2009, 09:20 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)