stresslinux 0.3.1 final (31.05.2006)
- UPD: 2.6.16.18 / added realtek R1000 driver
- UPD: busybox 1.1.3
- ADD: optional boot entry without initrd
- ADD: nepim 0.27 (http://www.nongnu.org/nepim/) requested by Everton Marques
- ADD: netperf 2.4.2 (http://www.netperf.org/netperf/NetperfPage.html) requested by Everton Marques
- ADD: iperf 2.0.2 (http://dast.nlanr.net/Projects/Iperf/) requested by Everton Marques 

stresslinux 0.3.1rc4 (17.05.2006)
- UPD: 2.6.16.16 / updated Areca driver to version 1.20.0X.13
- UPD: lm_sensors 2.10.0
- UPD: stress 0.18.8
- UPD: lshw B.02.08.01
- UPD: busybox 1.1.2
- UPD: hddtemp 0.3-beta15 + hddtemp.db
- ADD/UPD: Tyan S2676, S2865, S2891, S2892, S5112, S5151, S5360 to sl-wizard

stresslinux 0.3.1rc3b (15.11.2005)
- ADD: added arcmsr raid driver (ARECA Raid Controllers)

stresslinux 0.3.1rc3 (12.11.2005)
- UPD: hddtemp.db
- UPD: kernel to 2.6.14.2
- UPD: x86info 1.17
- UPD: stress 0.18.6
- UPD: busybox 1.01
- UPD: syslinux 3.11
- UPD: lshw B.02.06
- UPD: memtest86+ 1.65

stresslinux 0.3.1rc2 (11.09.2005)
- UPD: /etc/init.d/hddtemp script -> path fix for hddtemp
- UPD: hddtemp.db
- UPD: kernel to 2.6.13.1
- UPD: lm-sensors to 2.9.2
- FIX: modules.dep is now build correctly
- ADD: full hddtemp version, replace busybox version
- ADD: tiobench
- FIX: parted lib
- FIX: hopefully some fb problems
- ADD: experimental load of network & scsi/sata drivers in initrd
- KNOWN PROBLEMS: select-sensors unloads driver moduls, 
	which may be needed for hardware 

stresslinux 0.3.1rc1 (29.05.2005)
- UPD: Changed distribution base to Debian Sarge 3.1
- UPD: complete new build system for this distribution 
- UPD: removed 2.4 kernels, updated to 2.6.11.11
- UPD: lm_sensors 2.9.1
- ADD: network configuration script (netconf)
- ADD: memtester 4.0.5 (requested by Remi Broemeling)
- UPD: memtext86+ 1.55
- UPD: memtest86 3.2
- UPD: syslinux 3.08
- UPD: nail 11.22
- UPD: lshw to B.02.03
- UPD: smartmontools 5.33
- UPD: busybox 1.00
- UPD: iometer from CVS (kernel module does not compile with current kernels)
- UPD: ethstatus 0.4
- UPD: pcopy 1.5
- UPD: busybox 1.00
- UPD: hddtemp 0.3-beta13
- UPD: x86info 1.13
- ADD: /dev/twa files for 3ware 9000 controllers
- ADD: some new Tyan (and others) mainboard configurations to sl-wizard
- PATCH: message file (removed tab space in i386 line - usb only)
- PATCH: write loopback informations to /tmp/hosts if not running dhcp
- PATCH: copy /etc/nail.rc.dist to /tmp/nail.rc (normally done by dhcp script)

stresslinux 0.3.0pre1 (27.08.2004)
- UPD: Changed Distribution base from SuSE 7.3 to SuSE 9.1
- UPD: smartmontools to 5.32
- UPD: hddtemp to 0.3-beta11
- UPD: hddtemp.db (03C)
- UPD: busybox to 1.00-rc3
- UPD: lshw to A.01.07
- UPD: syslinux to 2.11
- UPD: hddtemp watch now ignores vmware disks
       scsi disk watch is now inactive (usb-storage device and other flash types causing errors)
- UPD: Linux Kernel to 2.4.27 
	added i386 kernel for Cyrix,K6,Via CPUs
	more modular, more network & scsi drivers
- ADD: Linux Kernel 2.6.8.1 (i386)
	this one should run on most CPUs
- UPD: i2c & lm_sensors to 2.8.7
- ADD: rsync & fsck utilities
- ADD: iometer (dynamo) (requested by Daniel Scheibli)
- ADD: nbench (requested by Florian Arzberger)
- ADD: cpuburn-in (another CPU Burn-in test)
- ADD: Tyan S2725, S2727, S2735, S2875, S2881, S2882, S2885, S5102rev4, GS12 (B5103)
       MSI 6741 K8TM/K8MM, ASUS CUWE-FX, ASUS P2L97-DS, Shuttle FN85 to sl-wizard
- ADD: Stresslinux logo to bootmenu
- ADD: syslogd,klogd
- ADD: udhcp start can be activated by kernel commandline paramenter net=1
- ADD: nail (11.3) - need an smtp gateway
- WRK: initrd, cdrom detection... <- this drives me crazy, but currently it seems to work like before
- BUG: bootmenuelogo changes colors in textmenue by entering with it (syslinux problem??) 
- PATCH: busybox udhcpc patch to support www,smtp,pop3,irc server messages
- PATCH: extended udhcpc default script to write /etc/hosts (/tmp/hosts) and /etc/nail.rc (/tmp/nail.rc)
- PATCH: sl-wizard, on 2.6 preload i2c-sensor modul
- PATCH: /etc/init.d/boot specify fs on /tmp mount

stresslinux 0.2.6 (05.10.2003)
- UPD: busybox to 1.00pre3
- UPD: lshw to A.01.04
- UPD: smartmontools to 5.19
- UPD: netio to 1.23
- UPD: openssl to 0.9.7c
- UPD: openssh to 3.7.1p2
- UPD: Tyan S2723 sensors.conf
- ADD: Tyan S3022 to sl-wizard
- ADD: Supermicro P4SGA to sl-wizard
- ADD: MSI-6764 to sl-wizard

stresslinux 0.2.5 (09.09.2003)
- UPD: kernel to 2.4.22 (added extra nic modules & activated isa-bus/isa-pnp support)
- ADD: tc902x nic driver module
- UPD: syslinux to 2.06
- UPD: netio to 1.21
- UPD: smartmontools to 5.1-18
- ADD: ASUS CUV4X-D to sl-wizard
- ADD: pcopy 1.3
- FIX: Display bug in sl-wizard.sh @ 80x25 mode 

stresslinux 0.2.4 (21.08.2003)
- ADD: mk_bootstic creates a bootable usb-memory stic
- UPD: smartmontools to 5.1-16
- UPD: x86info to 1.12b
- UPD: lshw to A.01.03
- UPD: hddtemp to 0.3-beta8

stresslinux 0.2.3 (06.08.2003)
- ADD: smartmontools 5.1-14 Suggested by: Frieder Ferlemann
- ADD: OpenSSH_3.6.1p2 
- ADD: ethstatus 0.3.0 on tty10
- UPD: stress to 0.18.1
- UPD: CD-Drive now runs with ide-scsi
- UPD: pci.ids & usb.ids
- ADD: Supermicro P4SBR/SBE to sl-wizard
- ADD: Gigabyte 6VXD7 to sl-wizard
- ADD: Tyan S2099, S2468 & S2726 to sl-wizard
- UPD: Tyan S2098, S2460, S2462, S2466, S2469 sensor config files
- ADD: tested VIA Based Boards: Tyan S2505T, Shuttle SV24, SV25

stresslinux 0.2.2 (31.07.2003)
- ADD: MSI-6390 to sl-wizard
- ADD: Tyan S2708 (don't know what board this could be??)
- ADD: hpt374 driver module
- UPD: busybox to 1.00pre2

stresslinux 0.2.1 (22.07.2003)
- ADD: enabled hddtemp output for scsi disks on tty11
- ADD: Tyan Thunder HEsl S2567 to sl-wizard
- ADD: Tyan Thunder i7505 S2665 to sl-wizard
- ADD: ASUS A7V to sl-wizard
- ADD: missing lm_sensors modules
- ADD: bonnie++ 1.03a
- ADD: lshw A.01.02 (Hardwarelister) Suggested by: John Barton
- ADD: nvnet.o for nvidia nforce2 network
- ADD: build PXE package with sample configs
- UPD: syslinux (isolinux) -> 2.05
- UPD: hddtemp.db (4 new disks)

stresslinux 0.2.0 (16.07.2003)
- UPD: i2c-2.8.0 
- UPD: lm_sensors-2.8.0
- UPD: busybox 1.0.0pre1
- UPD: hddtemp.db (3 new disks)
- UPD: fixed append vga=0x317

stresslinux 0.1.6 (12.07.2003)
- ADD: Shuttle FN41 (SN41G2) to sl-wizard
- ADD: ECS K7SOM to sl-wizard
- ADD: Tyan S2688 Thunder HEsl-T to sl-wizard
- UPD: Tyan S2880 sensors.conf

stresslinux 0.1.5c (04.07.2003)
- ADD: ASUS P3B-F and MSI-6580 v2.0 to sl-wizard
- UPD: kernel recompile for video mode selection/vesafb
- UPD: typos, small fixes

stresslinux 0.1.5b (25.06.2003)
- UPD: stress to version 0.17.2
- UPD: hddtemp to 0.3beta7, new hddtemp.db
- ADD: hddtemp ide-disk detection and monitoring on tty11
- ADD: p4b_smbus.o needed for P4B Hardwaremonitoring / kernel recompile
- UPD: names in bootmenu (no more dashs)
- ADD: Opteron/K8 testkernel (not tested!)
- ADD: Tyan S2518 sensors.conf

stresslinux 0.1.5a (24.06.2003)
- ADD: sl-wizard with dialog frontend, starts at login, bugs fixed
- ADD: sensors output on tty12
- UPD: remasteringpackage cleanup

stresslinux 0.1.4a (22.06.2003)
- UPD: Kernel -> 2.4.21
  - ADD: SCSI AIC79xx
  - ADD: Sensor lm85 -> Tyan Thunder K8S
- UPD: sl-wizard.sh some configs for Tyan Boards incl. sensor config files

stresslinux 0.1.3a (03.06.2003)
- ADD: memtest
- ADD: keyboardlayout can be changed at first login (Default: german)

stresslinux 0.1.2a (01.06.2003)
- ADD: Kernel 2.4.20 for P4 + AMD
- UPD: sl-wizard.sh (Tyan S2518)
- ADD: Networkbenchmark "netio"

stresslinux 0.1a (31.05.2003)
- initial release
   - Kernel 2.4.20 (P3) 4GB
   - Netzwerk 3COM,Intel,Tulip,Realtek,SiS,Via
   - SCSI Adaptec AIC7xxx, LSI/NCR 8xx,3Ware 3w-xxx, Promise FastTrak (mod), Highpoint 37x (mod)
   - CD-Rom IDE = hdc / SCSI = scd0
   - Hardwaremonitoring with m_sensors (sl-wizard.sh)
   - Tools: CPUburn, stress, hddtemp